(1) Handle the machine with care. When moving the water dispenser refrigerated by the compressor, try to keep it moving upright. If you want to tilt it, the tilt should not exceed 45 degrees, and it must be stationary for a period of time after handling. Work.
(2) When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after draining the remaining water in the machine. After adding a large bottle of water, turn on the hot water faucet, and then plug in the power supply and turn on the heating switch after water flows out to avoid dry burning and prolong the life of the machine.
(3) If the water dispenser is out of service for a long time, please turn off the machine switch and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please pay attention to hot water burns during the draining process).
Hot Cold Water Dispenser Purfier W8900-2F
Hot Cold Water Dispenser Purfier W8900-2F
(4) It is best to disconnect the power supply when not in use at night, which can save energy and ensure safety when no one is using it.
(5) During the use of the machine, it is recommended to clean and disinfect it every three months or so according to the specific situation. After one year of use, you can ask professional maintenance personnel to clean the smart seat and inner tank.
(6) The water dispenser should be placed in a ventilated place to prevent moisture, avoid direct sunlight, and keep away from heating. It should be about 15 cm away from the wall. The water dispenser should not be placed close to valuable furniture and other household appliances to avoid damage to items by splashing water. The water dispenser must be placed steadily to prevent the machine from making noise.
(7) It is forbidden to use gasoline and other organic solvents to clean the surface of the machine.
(8) If the power cord is found to be damaged, the water dispenser must be replaced with a special soft cord or contact the dealer. The machine must use a socket with a grounding device and a leakage protector to prevent the shell from being electrified.
(9) Children should not play next to the water dispenser. If necessary, replace the hot water faucet with a safety faucet to prevent children from being scalded.
(10) Do not penetrate the metal rod into the ventilation window of the back panel, so as not to damage the fan or cause electric shock; do not cover the ventilation window of the fan, so as to avoid damage to the semiconductor refrigeration components due to poor air exhaust and poor heat dissipation, resulting in adverse conditions.
(11) For water dispensers that use compressor refrigeration, after the refrigeration power supply is disconnected, it takes 3-5 minutes to restart to prolong the life of the machine.
(12) When pressing the faucet to receive water, do not use too much force to prevent the rotating part of the pressing hand from falling out or being damaged.