English
简体中文
English1.Do not move the machine frequently
When installing a water purifier, professional installers usually install and debug the water purifier related waterways and interfaces according to the actual installation environment of your home. Therefore, if there is no need to move the machine, it is recommended that you do not move the machine frequently and significantly without authorization. If you really need to move, it is recommended to contact a professional installer to come and handle it for you, so as to avoid the risk problems that may occur due to unauthorized movement.
2.Avoid "Water Hammer"
If the water pressure of tap water fluctuates in the pipeline, it is easy to produce "water hammer phenomenon". If the water pressure is too high in an instant, it will cause damage to the internal components of the water purifier. To avoid this from happening, Lowns recommends that you turn off the water purifier before going out for a long time. Of course, if you have a bad memory or feel troublesome, you can also install a special valve on the front of the water purifier to protect the water purifier from "water hammer" damage.
3.Avoid sun exposure or severe cold
The water purifier should be installed in a ventilated and dry place to avoid extreme temperature shortening its service life. Especially in summer, the outdoor sun exposure will not only cause the aging of the panel components of the water purifier, but also may cause the wading parts inside the water purifier to breed algae. This not only affects the filtration effect of the water purifier and the safety of water output, but also causes the filter element or other related components of the water purifier to die prematurely. For areas where the outdoor temperature is below 0 °C in winter, this is likely to cause damage to the water purifier-related waterway components. Therefore, the water purifier is most suitable for installation in a cool and dry place indoors.
4.Rinse the filter element regularly
The core component of the water purifier to purify water is the filter element. When the filter element in the water purifier is used for a certain period of time, the filter element will adhere to a large amount of filtered impurities. Over time, these impurities will inevitably lead to a decline in the filtration efficiency of the water purifier. Therefore, in daily use, you need to regularly flush the filter element of the water purifier. If your water purifier comes with an automatic flushing function, then don’t worry too much. When the water purifier works for a period of time, the flushing function will be automatically activated. You can also manually press the flush function key to easily complete the flushing of the water purifier. One day at a time must be great!
